Fully Automatic Fabric Spreading Machine

Timing fully automatic spreading machine with automatic fabric expanding system, PLC touch panel, user friendly and simple operation increases production efficiency and also ensures the best quality.
 

What is the spreading speed?

The machine adopts a servo-driven stepless speed control system with a spreading speed range of:

0–20 m/min

High-Speed Mode

12–20 m/min

Ideal for woven fabrics and mass production

Low-Speed Mode

0.5–10 m/min

Suitable for elastic, lightweight, and coated fabrics

The servo soft-start technology ensures smooth acceleration and deceleration without fabric distortion.

How accurate is the spreading process?

Timing automatic spreading machines are equipped with:

Closed-loop tension control system

Automatic edge alignment system

Fabric relaxation mechanism

Accuracy Performance

Fabric stretch deviation: ≤ ±0.3%

Edge alignment accuracy: ±1.5 mm

Table flatness tolerance: ≤ 0.5 mm

This helps reduce fabric waste by approximately 3–5% while improving cutting consistency.
 

◆ Less Labor Cost: One staff (Wages and benefits is RMB4000/month); at peak seasons, staffs running on two shifts while one operator can manage the spreader easily; and if set with movable table, one spreader can set for two table lines

◆ Faster Working Efficiency: According to the fabric, the spreader can reach an average speed at 90m/min. E.g., based on 8 hours, in addition to the time loss of the fabric loading, let's calculated the speed at 20m/min, the total length of the fabric we spreading would be 8000 meters one day.

◆ Increase fabric utilization: One hard, NO tension spreading operation assures the same tension of each layer, of which lengthen the marker length, on the other hand, the position accuracy is within 5mm, compared with labors spreading way, it saved 2cm at least for each layer. E.g.: The standard spreading
◆ length is 8000 m daily of one spreader, counted on 320 working days annually, the total fabric in spreading would be 2,560,000 meters, say the fabric cost RMB8/meter, and the set length of one layer is 10 meters

Models	TSK7-160	TSK7-190	TSK7-210
Electricity	1P/AC220V - 50Hz - 15A/1.5KW
Working Width	63''/1600mm	75''/1900mm	83''/2100mm
Table Width	72''/1830mm	84''/2130mm	92''/2330mm
Roll Weight	Standard:80kgs max; Customized: 100kgs max
Roll Diameter	450mm max
Carriage Speed	90m/min max
Ply Height	One-Way: Standard 220mm; Customized:300mm Face to Face:150mm

Does the machine support tension-free spreading?

Yes.

The machine features Timing's proprietary fabric relaxation system that automatically releases internal fabric tension before spreading.

Benefits include:

Reduced fabric shrinkage

Improved dimensional stability

Better cutting accuracy

Enhanced consistency for knitted and stretch fabrics

What spreading modes are available?

Timing automatic spreading machines support five spreading methods:

Face-to-Face Spreading

For fabrics requiring face-to-face cutting.

One-Way Spreading

Suitable for directional fabrics.

Reciprocating Spreading

Automatic spreading in both directions without manual fabric turning.

Segmented Fixed-Length Spreading

Ideal for mixed production and small-batch orders.

Tension-Free Relaxed Spreading

Designed for elastic and knitted fabrics.

How much productivity improvement can be expected?

Compared with manual spreading:

Manual Spreading

4 workers

Approximately 8,000 meters per shift

Timing Automatic Spreading Machine

1 operator

Over 18,000 meters per shift

Benefits:

Productivity increase exceeding 220%

Replacement of 3–4 spreading workers

Reduced labor costs

Improved production standardization

Can the machine operate continuously?

Yes.

The machine is designed for:

24/7 continuous operation

Multi-shift factory production

Long-term heavy-duty workloads

The servo-driven structure ensures:

Stable performance

No step loss

No abnormal downtime

High reliability
 

Can fabric parameters be stored and recalled?

Yes.

The system can store more than:

99 fabric recipes

Parameters include:

Fabric tension

Spreading speed

Lay length

Lay height

Spreading mode

Operators can switch styles with one click, reducing setup time by over 80%.

Does the machine support automatic edge alignment?

Yes.

The infrared edge correction system continuously monitors fabric position and automatically adjusts alignment during spreading.

Advantages:

Improved layer consistency

Reduced manual intervention

Higher fabric utilization

Can the machine automatically cut fabric?

Yes.

The machine is equipped with an automatic pneumatic cutting system that provides:

Clean cuts

No fraying

No skewed edges

Stable cutting performance for thick fabrics

Can it integrate with automatic cutting machines?

Yes.

Timing spreading machines can seamlessly connect with:

TX Series Automatic Cutting Machines

TE Series Automatic Cutting Machines

TC Series Automatic Cutting Machines

TMSC Single-Ply Cutters

TCS Spreading & Cutting Integrated Systems

The machine can also communicate with third-party cutting equipment.
​​​​​​​

Which CAD systems are supported?

The machine supports most mainstream CAD software, including:

Gerber

Lectra

Richpeace

ET

Full Pattern

Other CAD systems can also be connected through standard data interfaces.

Hot Tags: fully automatic fabric spreading machine, China fully automatic fabric spreading machine manufacturers, suppliers, fabric spreader, Automatic Spreading Machine, Fully Automatic Fabric Spreading Machine