Main points of use the automatic fabric cutting machine

When using a automatic cutting machine, a series of steps need to be followed to ensure the correctness and safety of the operation. The following is a typical computer cutting machine operation process:
Preparation before operation:
Check if the power supply is functioning properly.
Ensure that the machine switch is functioning properly, move the machine to the control origin, and check for any abnormalities.
Ensure that the area around the machine is unobstructed and free of foreign objects.
Check if the fabric to be cut meets the standard requirements.
During operation:
Turn on the gas source and power supply.
Start the computer and related cutting software.
Automatically reset the cutting machine origin and clear any errors.
Open the nesting software, select the desired nesting diagram, and generate a conversion.
Open the cutting software, load the layout diagram, and ensure its correctness.
Perform fabric feeding operation to ensure the balance between the fabric and the cutting bed, and keep the front edge of the fabric not exceeding the machine's balance frame.
Cover with masking film and use suction function to secure the fabric.
Determine the cutting position and fabric size, adjust the fabric shrinkage rate while ensuring the availability of the cut pieces, and calculate and confirm.
Start cutting, pay attention to handling fabric offset issues.
Handle the emergency suspension situation of the cutting machine, solve the problem, and clear the error.
Reload the layout diagram and confirm the location of the infrared light points.
Continue the cutting process.
After cutting is completed, move the machine frame out of the fabric range.
Cut off the plastic film and perform feeding and picking operations.
After operation:
Close the control panel, air valve, and power supply.
Check if the blade is intact.
Clean the machine, perform maintenance, and protect it with a protective cover.
It is worth noting that automatic cutting machines have the characteristics of high efficiency and precision, which can improve production efficiency and cutting quality. However, it is necessary to follow the corresponding operating procedures and pay attention to safety and maintenance during operation. In addition, before using the cutting machine, it is necessary to be familiar with and understand the main performance and function of the automatic cutting machine. Professional training and qualification are required before operating the machine.